1. Arrange students into groups. Each group needs at least ONE person who has a mobile device.
2. If their phone camera doesn't automatically detect and decode QR codes, ask students to
4. Cut them out and place them around your class / school.
1. Give each group a clipboard and a piece of paper so they can write down the decoded questions and their answers to them.
2. Explain to the students that the codes are hidden around the school. Each team will get ONE point for each question they correctly decode and copy down onto their sheet, and a further TWO points if they can then provide the correct answer and write this down underneath the question.
3. Away they go! The winner is the first team to return with the most correct answers in the time available. This could be within a lesson, or during a lunchbreak, or even over several days!
4. A detailed case study in how to set up a successful QR Scavenger Hunt using this tool can be found here.
Question | Answer |
1. What holds fabric | Pins | 2. What sewing tool brings thread through fabric | Needles | 3. The purpose of a thread guide on a sewing machine is to keep what | thread from tangling | 4. The two small rows of metal teeth on a sewing machine that advances the fabric evenly are called what | Feed dog | 5. Name the tool used to transfer markings from a pattern piece to fabric | Tracing wheel | 6. What tool do you use to measure body parts | Tape measure | 7. If you need to remove unwanted stitches from a seam what do you use | Seam ripper | 8. What sewing machine part keeps te fabric securely in place while stitching | Presser foot | 9. Name the sewing machine part that provides thread for the bottom side of the stitch | Bobbin | 10. What is the most basic necessary tool for cutting | Dressmaker's shears | 11. What is the best way to store pins not being used | Pin cushion | 12. What is the purpose of thread guides on a sewing machine | Thread from tangling | 13. When you are sewing and you remove pins from fabric where do you place them | Pin cushion | 14. When do you replace a sewing machine needle | Bent, Damaged, Rusty | 15. The feed on a sewing machine moves what | fabric | 16. Gliding back and forth on fabric would be called what | Ironing | 17. Lifting up and Lowering it down on a garment would be called what | Pressing | 18. Scissors and Shears should always be what when they are not being used | Closed | 19. Why should one use an press cloth for pressing an garment | prevent shine | 20. Pinking shears are used to finish the edge of what | Fabric | 21. When would someone use a thimble | Hand sewing | 22. When tracing marking of Dart's from a pattern piece onto fabrics one needs to remember to place the tracing paper on both of the wrong sides of the fabric and to put enought pressure on the what to transfer the markings | Tracing wheel | 23. When sewing a sew-through button wind the thread several times around the stitches under the button to form a what | Thread shank | 24. When cutting out pattern pieces what line do you cut on | Solid dark lines | 25. On a pattern piece what does the Diamond shapes mean | Notches | 26. If you don't know which patter pieces to cut out where can you find information | Pattern guide sheet | 27. To begin sewing the needle should always be in what position | Down | 28. To determine placement of pattern pieces on fabric what should you check | Pattern guide sheet | 29. Instructions for cutting, marking, and sewing can be found where | Pattern guide sheet | 30. To change the appearance of a zigzag stitch what do you adjust on a sewing machine | Stitch width control | 31. How many strands o thread should you use to sew on a button | 2 | 32. Place the pins on fabric how | Perpendicular | 33. When pinning make should pin through what | Pattern piece & fabric | 34. A simple seam allowance is what measurement | 5/8 inches | 35. To sew a simple seam, remember to do what at the Beginning and the End of the Seam to Secure it | Backstitch | 36. When sewing a seam on a sewing machine watch for what | edge of the fabric & the guideline | 37. What should you do when Henning a garment | mark where the new hem should be | 38. To cut fabric use long even what | Strokes | 39. The shank on a button is there to allow for what | room to close | 40. Care instructions for fabric are found where | Bolt of Fabric | 41. To create a seam finish use what | pinking shears | 42. The notches on the pattern pieces are used for what | matching one another up |
What holds fabric&choe=UTF-8
Question 1 (of 42)
What sewing tool brings thread through fabric&choe=UTF-8
Question 2 (of 42)
The purpose of a thread guide on a sewing machine is to keep what&choe=UTF-8
Question 3 (of 42)
The two small rows of metal teeth on a sewing machine that advances the fabric evenly are called what&choe=UTF-8
Question 4 (of 42)
Name the tool used to transfer markings from a pattern piece to fabric&choe=UTF-8
Question 5 (of 42)
What tool do you use to measure body parts&choe=UTF-8
Question 6 (of 42)
If you need to remove unwanted stitches from a seam what do you use&choe=UTF-8
Question 7 (of 42)
What sewing machine part keeps te fabric securely in place while stitching&choe=UTF-8
Question 8 (of 42)
Name the sewing machine part that provides thread for the bottom side of the stitch&choe=UTF-8
Question 9 (of 42)
What is the most basic necessary tool for cutting&choe=UTF-8
Question 10 (of 42)
What is the best way to store pins not being used&choe=UTF-8
Question 11 (of 42)
What is the purpose of thread guides on a sewing machine&choe=UTF-8
Question 12 (of 42)
When you are sewing and you remove pins from fabric where do you place them&choe=UTF-8
Question 13 (of 42)
When do you replace a sewing machine needle&choe=UTF-8
Question 14 (of 42)
The feed on a sewing machine moves what&choe=UTF-8
Question 15 (of 42)
Gliding back and forth on fabric would be called what&choe=UTF-8
Question 16 (of 42)
Lifting up and Lowering it down on a garment would be called what&choe=UTF-8
Question 17 (of 42)
Scissors and Shears should always be what when they are not being used&choe=UTF-8
Question 18 (of 42)
Why should one use an press cloth for pressing an garment&choe=UTF-8
Question 19 (of 42)
Pinking shears are used to finish the edge of what&choe=UTF-8
Question 20 (of 42)
When would someone use a thimble&choe=UTF-8
Question 21 (of 42)
When tracing marking of Dart's from a pattern piece onto fabrics one needs to remember to place the tracing paper on both of the wrong sides of the fabric and to put enought pressure on the what to transfer the markings&choe=UTF-8
Question 22 (of 42)
When sewing a sew-through button wind the thread several times around the stitches under the button to form a what&choe=UTF-8
Question 23 (of 42)
When cutting out pattern pieces what line do you cut on&choe=UTF-8
Question 24 (of 42)
On a pattern piece what does the Diamond shapes mean&choe=UTF-8
Question 25 (of 42)
If you don't know which patter pieces to cut out where can you find information&choe=UTF-8
Question 26 (of 42)
To begin sewing the needle should always be in what position&choe=UTF-8
Question 27 (of 42)
To determine placement of pattern pieces on fabric what should you check&choe=UTF-8
Question 28 (of 42)
Instructions for cutting, marking, and sewing can be found where&choe=UTF-8
Question 29 (of 42)
To change the appearance of a zigzag stitch what do you adjust on a sewing machine&choe=UTF-8
Question 30 (of 42)
How many strands o thread should you use to sew on a button&choe=UTF-8
Question 31 (of 42)
Place the pins on fabric how&choe=UTF-8
Question 32 (of 42)
When pinning make should pin through what&choe=UTF-8
Question 33 (of 42)
A simple seam allowance is what measurement&choe=UTF-8
Question 34 (of 42)
To sew a simple seam, remember to do what at the Beginning and the End of the Seam to Secure it&choe=UTF-8
Question 35 (of 42)
When sewing a seam on a sewing machine watch for what&choe=UTF-8
Question 36 (of 42)
What should you do when Henning a garment&choe=UTF-8
Question 37 (of 42)
To cut fabric use long even what&choe=UTF-8
Question 38 (of 42)
The shank on a button is there to allow for what&choe=UTF-8
Question 39 (of 42)
Care instructions for fabric are found where&choe=UTF-8
Question 40 (of 42)
To create a seam finish use what&choe=UTF-8
Question 41 (of 42)
The notches on the pattern pieces are used for what&choe=UTF-8
Question 42 (of 42)