|
"Nameplate Project": HTML5 Crossword |
Across3. A _______,________ is used to shape and smooth wood (4,6)
5. A __________ is used to test and identify changes needed to be made to a design (9)
6. When waiting for a machine, stand behind the _____ _____ (6,4)
9. What is a tri-square is used to measure? (5,6)
10. Plywood and MDF are examples of _________ ______ (7,6)
15. _______ ________ must be worn when using the belt sander and pillar dill (6,7)
17. Pine is a _________ (8)
18. Wood must be sanded until it is very ______ (6)
19. Paint in the same ___________ to achieve a smooth, even surface (9)
|
|
Down1. What did you use to cut your wood? (5,3)
2. Before drilling, the holes are dented using a ______ _____ (6,5)
4. Don't forget to wear an _______ (5)
7. Make these checks during your practical work (7,7)
8. Always leave the _____ closed (4)
11. Measurements are made using a ruler and _______ pencil (5)
12. What is used to hold wood in place whilst cutting? (5,4)
13. A _______ attitude is expected in the DT workshop at all times (8)
14. ______,_______ must be tied back (4,4)
16. Tidying up after a practical is a _______ responsibility (5)
|
new
edit
share
pdf:puzzle
pdf:answers
Create an editable copy
ACROSS
3. A _______,________ is used to shape and smooth wood (4,6)
5. A __________ is used to test and identify changes needed to be made to a design (9)
6. When waiting for a machine, stand behind the _____ _____ (6,4)
9. What is a tri-square is used to measure? (5,6)
10. Plywood and MDF are examples of _________ ______ (7,6)
15. _______ ________ must be worn when using the belt sander and pillar dill (6,7)
17. Pine is a _________ (8)
18. Wood must be sanded until it is very ______ (6)
19. Paint in the same ___________ to achieve a smooth, even surface (9)
DOWN
1. What did you use to cut your wood? (5,3)
2. Before drilling, the holes are dented using a ______ _____ (6,5)
4. Don't forget to wear an _______ (5)
7. Make these checks during your practical work (7,7)
8. Always leave the _____ closed (4)
11. Measurements are made using a ruler and _______ pencil (5)
12. What is used to hold wood in place whilst cutting? (5,4)
13. A _______ attitude is expected in the DT workshop at all times (8)
14. ______,_______ must be tied back (4,4)
16. Tidying up after a practical is a _______ responsibility (5)

|